Mercury New OEM Aluminum Quicksilver Black Diamond 3-Blade 19" Propeller QA1916X

Brand new, genuine Mercury Marine / Mercruiser BLACK DIAMOND (14 1/2 X 19") QUICKSILVER RH PROPELLER. This is a factory original equipment item, not aftermarket.

It's not just an average aluminum propeller - there is a reason the Black Diamond is the world's best-selling aftermarket propeller! No other prop on the market today provides as much performance, durability, and value as a Black Diamond aluminum propeller. It's designed to be the perfect complement to any outboard or stern drive

• Hub kit sold separately, see the fitment section below to select the correct hub kit for you application
• Right Hand Rotation
• 3 Blade Aluminum
• 19" Pitch, 14 1/2" Diameter
• Fits most outboards (2.5 horsepower and above), Alpha , Bravo One and Volvo-Penta SX stern drives, recommended for engines with less than 250 horsepower and a top speed of less than 50 MPH

SKU# QA1916X

Fits:

• EVINRUDE/JOHNSON OUTBOARDS: 100 HP-300 HP V-6/V-8 OUTBOARD - EVINRUDE/JOHNSON
• 15 Tooth Spline
• 100 HP V-4 Commercial 1984 & Newer, 115 HP V-4 '95 & Newer
• 120 HP V-4 1985, 130 HP V-4 1995 & Newer
• 140 HP V-4 (25"_ 1989-94, 140 HP V-4 1985
• 150 HP V-6 Commercial 1993 & Newer
• 150 HP V-6 1978 & Newer (including E-TEC)
• 155 HP V-6 Commercial 1978 & Newer
• 175 HP V-6 1977 & Newer (including E-TEC)
• 185 HP V-6 1984-85, 200 HP V-8 1991 & Newer (including E-TEC)
• 200 HP V-6 E-TEC
• 225 HP V-6 1986 & Newer, 250 HP V-8 1991 & Newer (including E-TEC)
• 250 HP V-6 E-TEC
• 250 HP HO V-6 E-TEC
• 275-300 HP V-8 Two Strokes 1986-95
• 300 HP V-6 E-TEC
• Hub Kit: Use Flo-Torq II hub kit #835265Q02 for 1991 and newer applications. Purchased Separately.
• Hub Kit: Use Flo-Torq II hub kit #835267Q1 for 1990 and older applications. Purchased Separately.
• HONDA OUTBOARDS: 115 D, 135-250 HP - HONDA
• 15 Tooth Spline
• 115D, 135-150 HP 2004 & Newer
• 200-250 HP (4-Stroke) 2002 & Newer
• Hub Kit: Use Flo-Torq II attaching hardware kit #835278Q1. Purchased separately.
• MERCURY/MARINER OUTBOARDS: 135-350 HP - MERCURY/MARINER
• 15 Tooth Spline
• 135 HP 1987 & Newer, 150 HP 1978 & Newer
• 175 HP 1978 & Newer, 200 HP 1978 & Newer
• 220 HP 1987-88, 225HP 1980 & Newer
• 225 HP SeaPro/Marathon All Years
• 250-350 HP 2 and 4-Stroke 1990 & NEwer
• Hub Kit: Use Flo-Torq II hub kit #835257Q1 125-350 HP 2 & 4-Stroke 1990 & Newer (For Verado 350 use hub kit #840389Q06)
• Hub Kit: Use Flo-Torq II attaching hardware kit #835257Q1. For Verado 4 Cyl. 135-200 HP use Flo-Torq II attaching hardware kit #835257Q10. Purchased Separately.
• YAMAHA OUTBOARDS: 150-300 HP - YAMAHA
• 15 Tooth Spline
• 150 HP 1986 & Newer, F150 4-Stroke 2004 & Newer
• 175 HP 1984 & Newer
• 200 HP 1984 & Newer, F200 HP 4-Stroke 2002 & Newer
• 220 HP Special 1984-85
• 225 HP Excel 1987-88
• 225 HP 1986 & Newer, F225 HP 4-Stroke 2002 & Newer
• 250 HP 1990 & Newer (including VMAX), F250 HP 4-Stroke 2005 & Newer
• 300 HP 2003 & Newer, 300 HDPI 2004 & Newer
• 200-250 HP SHO 4-Stroke
• Hub Kit: Use Flo-Torq II attaching hardware kit #835271Q2. Use Flo-Torq II attaching hardware kit #8M0075402 with 200-250 HP SOH. Purchased Separately.
• MERCRUISER STERNDRIVES: ALPHA ONE, MERCRUISER I
• MerCruiser I 120-190 HP
• Models 470, 485, 888, 898, 225S & 233
• Alpha One 1986 & Newer
• 2.5 Liter 120 HP 1986-89
• 3.0 Liter 125-140 HP 1986 & Newer
• 3.7 Liter 165-190 HP 1986-89
• Warning! Check adequate tip clearance with stainles and 4-blade aluminum props. If necessary, switch to a flat tab anode (#76214Q5) or high performance trin tab (#822777Q1) to permit clearance.
• MERCRUISER STERNDRIVES: ALPHA ONE / BRAVO ONE
• MerCruiser 200-280 HP Thru 1985
• Models 228, 255, 260, & 280TRS
• Alpha One / Bravo One 1986 & Newer
• 4.3 Liter 155-250 HP 1986 & Newer
• 5.0 Liter 180-250 HP 1986 & Newer (including 262 Mag)
• Warning! Check adequate tip clearance with stainles and 4-blade aluminum props. If necessary, switch to high performance trim tab (#822777Q1) to allow adequate clearance.
• MERCRUISER STERNDRIVES: ALPHA ONE / BRAVO ONE
• Model 330TRS
• 5.7 Liter 210-320 HP 1986 & Newer
• 6.2 Liter 320 HP 2001 & Newer
• 7.4 Liter 300-385 HP 1988 & Newer
• 8.1 Liter 375-425 HP 2001 & Newer
• 8.2 Liter 390-415 HP 1990 & Newer
• Including 350, 454, 496, & 502 Mag. & 320 EFI
• Add 2" of pitch to suggested size for single engine applications 385 HP & above
• Caution! Check for adequate blade tip clearance when installing stainless steel propellers. If necessary, switch to Mercury trim tab #822777Q1 to ensure adequate blade clearance.
• SUZUKI OUTBOARDS: 150-300 HP - SUZUKI
• 15 Tooth Spline
• DT150/150S HP 1986 & Newer
• DT175 HP 1986-92
• DT200 HP 1986-2000
• DT225 HP 1990 & Newer
• DF150-DF300 All Year
• Hub Kit: Use Flo-Torq II attaching kit #835281Q1. Purchased Separately.