RMSTATOR New Aftermarket Yamaha Kit Stator 200 W + Regulator Rectifier + Ignition Coil + Flywheel + Flywheel Puller, RM22807

Brand new, Rmstator Kit Stator 200 W + Regulator Rectifier + Ignition Coil + Flywheel + Flywheel Puller.

Brand new kit High Output Stator + Voltage Regulator Rectifier + External ignition Coil + Flywheel + Flywheel Puller

• All shipped products are tested

All item pictures are accurate; if in doubt, do not hesitate to compare our item to your original part.

• Direct replacement to your original unit
• Plug-and-play, direct fit, easy installation
• Highest grade of lamination materials
• Highest grade of copper winding, resistant to 200 degrees Celsius
• Pick up pulsar coil included
• Connector included
• Rubber grommet included
• Back Plate included

• You must re-install your original connector
• Once your connector is re-installed, our part becomes a Plug-and-play unit, direct fit, and easy to install
• The Quality exceeds the OEM equipment
• Improved heat sink and charging capabilities
• Higher grade of electric components

• Direct replacement to your original unit
• Plug-and-play, direct fit, easy installation
• Highest grade of lamination materials
• Spark plug cap(s) included

Improved Stronger Magneto Flywheel Rotor

RMSTATOR is offering a new replacement flywheel with stronger magnetsfor your Suzuki and Kawasaki, this flywheel can be used as a direct replacement to the OEM.

We suggest combining it to our 100 or 200 watt stator as it will run the lights better in the lower rpm's.

• 27 MM x 1.0 Left hand male

PLEASE CHECK IF YOUR MAKE/MODEL IS COMPATIBLE IN THE "ALSO FITS" TAB BEFORE BUYING

Other specifications :
Number of wires : 6
Number of plugs : 3
Number of pins :6

Wire to wire resistance :
Alternator : Black to yellow = 0.2 ohms +/-20%
Pickup : White/Red to White/Green = 100 ohms +/-20%
Source : Red to Green = 15 ohms +/-20%

Regulator
Dimensions :
Width : 45mm
Length : 45mm
Height : 20mm
Fixation holes center to center : N/A

Other specifications :
Number of wires : 2
Number of pins : 2

External Ignition Coil
Bracket center to bracket : 90mm
Primary Resistance: 0.4?
Secondary Resistance: 6.0K?
Damped Resistance: 5K
Voltage Transfer Ratio: 150:1
Insulation Resistance: >1000M

Flywheel
Diameter : 130mm

OEM Replaced SKUs

• Sold Each

SKU# RM22807

Fits: